All about Multiple Effect Evaporators

The numerous impact design joins at least two evaporator bodies to save steam, which is dense in the principal impact heat exchanger as it were. Water dissipated in the primary impact fume body is dense in the second-impact heat exchanger, which gives energy to vanishing in the second-impact fume body. Fume from the last impact streams to a condenser.

The last-impact fume body is kept up at a high vacuum with a steam-fly air ejector or mechanical vacuum siphon. The main thrust is the weight drop from the first to the last impact.

For a similar in general weight differential and cycle conditions, the evaporator with more impacts will require less steam. The dissipation in each impact will be roughly 0.7 to 0.9 pounds for each pound of steam consolidated in the principal impact heat exchanger. For a similar vanishing rate, a five-impact evaporators will need about 25% of the steam needed for a solitary impact evaporator. In genuine practice, the steam economy can fluctuate broadly on account of contrasts in feed temperature and other energy necessities, for example, warms of weakening and crystallization.

The quantity of impacts is restricted by the complete accessible temperature distinction between the plant steam and the cooling water temperature. Cycle mixers with high limit rises commonly work with less impacts.

For More Information Click: Multiple Effect Evaporators

Was this helpful?

Leave a Comment

Your email address will not be published. Required fields are marked *

Open chat
Hi, If you need more information simply reply to this message. A WhatsApp message will be sent.