PNEUMATIC CONVEYING SYSTEM
Free Tool - For Small Entrepreneurs
Pneumatic Conveying System ( Lean Phase )
Backed by the sophisticated manufacturing unit we are able to offer a highly efficacious system in India. The latest technology in our systems ensures these can be integrated in various environments and we also offer the customized systems as per the client requirement. We have exported Such Systems to Europe (conveying Dist: 150 mts, Capacity 30 TPH).
High performance
Corrosion resistance
Durability
Consumes less floor space
CE Marked Components and Entire System
Should I use Pneumatic Conveying System?
It can be used for Dry Powders and Granules. There is a a wide variety of Materials that can be conveyed with this system. Be it powder of any mesh or Granules of around 5 to 10 mm sizes. Any material that needs to be conveyed with Pneumatic Conveying System should be Dry and Free flowing in the first place. its not advisable to use it if the material has high moisture level or if it is sticky. Some common examples are noted below.
- Dyes and pigments
- Cement
- Sand
- Bentonite
- Bleaching Clay
- Agro chemicals
- Pesticide
- Ash
- Coal powder
- coke
- Carbon Powder
- Sand
- Silica
- Glass dust
- Catalyst
- Teflon flakes, powder, granules etc
- Sugar
- Maize
- Food Grains
Plastic resin, Granules etc
You can see more videos of our products and Trials on our YouTube channel
For heavy materials and Granules, Lumps, Balls Etc.
Can convey materials up to 25 mm sizes
Components of This System
Feeder Rotary AirLock Valve
This Feeds the material into the conveying Line. It is most important component in the System. The size of this Rotary Airlock Valve is responsible for capacity limitation. It should be properly selected. Higher size will lead to chocking of the system. Smaller size will lead to reduced capacity of the system
Pickup Nozzle or Ventury
This is responsible for lining up the material into the conveying pipeline to be fluidized in the system. It is here that the material is fluidized and starts its journey.
Conveying Ducting
It is the main pipeline that conveys the material to the discharge point. Care should be taken to have shortest root during designing the layout.
Dust Collector
It separates the Fludized material from air. The air separated is vented our from the Blower. It filters the air and material giving out clean air.
Discharge Rotary Airlock Valve
It discharges the material collected in the Dust Collector. Without this Rotary Airlock Valve system cannot run. It is installed below the Dust Collector.
Other Optional Equipment
In place of a Dust Collector a cyclone separator can be used. Its outlet will be dusty. Hence it cannot be used when powders are conveyed. In some places Suction Blowers are used to smooth the air flow. When material is directly Discharged into silo. the Discharge Rotary Airlock Valve is installed below silos. When Multiple Discharge Points are to be catered, Diverter valves are used. A control Panel is also need to control all the motors and have necessary interlockings
Related Products
We are Dust Collection System Manufacturer in India. We manufacture and supply a wide…
We are Dense Phase Pneumatic Conveying System Manufacturer in India. We manufacture and supply a wide…
Feel free to dop us a line
Here anyone can read, write & share short stories.
Try it for free . No registration needed.